Subwoofer Speaker sub box design woofer enclosure diy project Rockford Fosgate R2D4-10 R2D4-12

-
Subwoofer Speaker sub box design woofer sealed enclosure diy project Rockford Fosgate  R2D4-10      R2D4-12 R2D2-10      R2D2-12

Rockford Fosgate Subwofer  sealed speaker box diy project                             10"               12"
 Dual 2-Ohm                                                                                                     R2D2-10      R2D2-12
 Dual 4-Ohm                                                                                                     R2D4-10      R2D4-12

 BUILDING AN ENCLOSURE


To work properly, the walls of the enclosure must be rigid and not flex
when subjected to the high pressures generated by the speaker's
operation. For optimum performance, we recommend using 3/4" MDF
(Medium Density Fiberboard) and internal bracing.The enclosure should
be glued together and secured with nails or screws.

Popular posts from this blog

Washing machine system diagram front loading parts

-
Image
Washing machine system diagram front loading parts:  1. Electronic board 2. Detergent dispenser 3. Tub suspension spring 4. Tub 5. Pressure switch 6. Detergent entry tube 7. Tube between solenoid and detergent dispenser 8. Solenoid 9. Water fill hose 10. Rear counterweight 11. Drum pulley 12. Bearings 13. Heating element with NTC 14. Drain hose 15. Motor pulley 16. Motor 17. Damper 18. Drain pump 19. Pressure chamber 20. Drain filter 21. Tube between tub and filter body 22. Eco-ball 23. Door safety interlock 24. Door 25. Door seal 26. Front counterweight In a washing machine, the dirt in the fibres is removed by a combination of mechanical and chemical  actions. The solenoid valve ducts water through the detergent dispenser, where it collects the detergent and passes  into the tub. The correct water level is controlled by one or more pressure switches. The fabrics loaded into the drum are maintained in cons...
Read more

Tweeter loudspeaker burning protection schematic

-
Image
Many loudspeaker systems incorporate  PolySwitch devices for  overcurrent protection. By tripping  during high-current conditions and  resetting when no longer needed,  PolySwitch devices provide reliable  protection without the nuisance  and replacement costs  associated with fuses. The Problem Today’s speakers are generally  designed and sold independently  of amplifiers. Thus, mismatches  may occur, which can lead to damage.  Also, the advent of digital  recordings and compact discs  places extra burdens on sound  systems. Speaker damage can  result from a number of factors,  including the following situations: • High-power amplifiers used with  low-power speakers may simply  overdrive the speaker coils with  excessive power during sustained high volume. • Low-power amplifiers may be  overdriven so that clipping  occurs. This causes an upward  frequency shift of power...
Read more

Speaker placement in dance club

-
Image
Speaker placement in a dance club, medium dance floor 30 - 100 sq meters, 320 - 1100 sq feet. Recommended JBL speaker products.  From  ear-splitting mega dance floors to  tranquil VIP lounges; from eclectic chill rooms to complex sound  booths.
Read more